SP-808-1 Intelligent digital Light Column Display Controller
Basic Info
Model No.: SP-808-1
Product Description
Specifications Light Column Display Controller
1.High quality
2.RS-232,RS-422,RS-485
3.80*160,96*96,160*80mm
4.-1999-9999 characters
SP-808-1 Intelligent digital Light Column Display Controller Function: With micro-processor applied for control calculation, the intelligent digital/light column display controller can run high-precision linear correction for various non-linear signals and change the type of input signal of instruments at will. With the latest non-jumper technology, an input signal for instruments can be changed into another input signal only by setting the parameters inside the instrument, further improving its multi-functionality and reliability of the instruments. It can choose alternating and direct voltage and current input or be chosen as frequency Meter counter to use in coordinating with various sensors and transmitters, which realizes the measurement of physical quantities such as temperature, humidity, liquid level and flow, the display alarm control as well as analog display (light column display with a resolution up to 100 lines) and makes the display of measurement values more clear and visual. The double light columns measurement value light column display + control (alarm) setting value light column display can also be available. Picture: Specification:
Contact us if you need more details on Light Column Display Controller. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Controller、Display Controller Hdmi. If these products fail to match your need, please contact us and we would like to provide relevant information.
1.High quality
2.RS-232,RS-422,RS-485
3.80*160,96*96,160*80mm
4.-1999-9999 characters
SP-808-1 Intelligent digital Light Column Display Controller Function: With micro-processor applied for control calculation, the intelligent digital/light column display controller can run high-precision linear correction for various non-linear signals and change the type of input signal of instruments at will. With the latest non-jumper technology, an input signal for instruments can be changed into another input signal only by setting the parameters inside the instrument, further improving its multi-functionality and reliability of the instruments. It can choose alternating and direct voltage and current input or be chosen as frequency Meter counter to use in coordinating with various sensors and transmitters, which realizes the measurement of physical quantities such as temperature, humidity, liquid level and flow, the display alarm control as well as analog display (light column display with a resolution up to 100 lines) and makes the display of measurement values more clear and visual. The double light columns measurement value light column display + control (alarm) setting value light column display can also be available. Picture: Specification:
Specification | ||
Model | SP-808-1 | SP-808-2 |
Input signal | Thermocouple: B,S,K,E,J,T | |
Thermal resistor: Pt100,Cu50 | ||
Distance resistor: 30-350Ω | ||
Standard current: 0-10mA, 4-20mA, 0-20mA | ||
Standard voltage: 0-5V, 1-5V mA | ||
Output signal | DC 0-10mA(loaded resistance: ≤750Ω) | |
4-20mA(loaded resistance: ≤500Ω) | ||
DC 0-5V 1-5V(loaded resistance: ≥250kΩ) | ||
Relay control output | Relay ON/OFF with repeatability | |
AC220/3A, DC24V/6A(Resistant load) | ||
SCR control output | SCR, 400V/0.5A | |
SCR(Solid state relay control signal) Output photo isolate, 400V/0.5A | ||
Solid state relay output | SSR(Solid state relay control signal) Output, photo isolation 6 to 12V/30mA | |
Communication output | Interface mode, standard serial bidirectional communication interface, photo isolation, RS-485, RS-232C, RS-422 | |
Baud rate | 300-9600bps, free internal setting | |
Feedback output | DC 24V, load ≤30mA | |
Measurement precision | ±0.2%FS or ±0.5%FS | |
Resolution | ±1 character | |
Measurement range | -1999 to 9999 characters | |
Display mode | High-brightness light column measurement dispaly | |
Control/Alarm | 1 to 4 limit control or alarm output is optional. LED dispaly control (or alarm) mode is relay ON/OFF with repeatability. | |
Parameter setting | Touching panel slightly or setting by buttons, The set parameter value is permanently saved after being feactivated and interlocked by a password. | |
Protection mode | Input loop opening alarming(for thermocouple or thermal resistor input), relay output status LED indication, input over/long range, alarm, insufficient voltage of power supply, automatic reset, abnormal operation automatic reset. |
Product Categories : Temperature Controller
Premium Related Products
Other Products
Hot Products
Intelligent Temperature Control Instruments/Digital Temperature Controller REX-9000D69-20 LCD AC Voltage Panel MeterDM96-H Sigle Phase Digital Power Factor meterDM72-PQH Three Phase Digital Combination MeterDM96-E4 Multi-function Digital MeterDM9648-P Single Phase Digital Power MeterDM72-U Single Phase Digital VoltmeterDM-48*96I Single Phase Digital AmmeterDC to AC 150W Modified Sine Wave Power Inverter25W Single Output Switching Power Supplylcd frequency meter SCD914F-X seriesHot!!! analog dc ammeterMade in Wenzhou high voltage indicator2012 new energy meter2013 Best Sale Mini digital metervoltmeter 2012 new digital three-phase