Slurry Density Concentration Meter

Density Slurry Density Concentration Meter

1. Product Overview
The Device Used To Measure Density (also known as a tapped density meter or tapped density analyzer), is specifically designed to measure the tapped density of powders as well as flaked or granulated materials by standardized and repeatable procedures. The Density Measurement Device easily changes key parameters such as drop height and tapping speed to meet different international standards. The LED and membrane control panel in the system provides fast and easy operation. The Ultrasonic Density Meter is also fitted with an acoustic cabinet to reduce the noise level, while a transparent plexiglass door allows operators to monitor the operation.
The Density Measuring Device system is integrated with a micro computer that prints the test data, including weight, volume, sample number, tap number, tap density, and operator, at the press of the button. The plastic coated outer surface is rugged and resistant to corrosion, ensuring easy cleaning and extended working life.

2. Product Principle
The principle of CM is based on the ultrasonic attenuation.

3. Product Features

♢ Adopting digitalized multi frequency ultrasonic emission technology, high driving reliability, and no drift;
♢ Data processing adopts a multi curve fitting algorithm to ensure the maximum fitting of relevant parameters;
♢ The medium concentration or density Ultrasonic Density Meter can be measured according to the application requirements of the field;
♢ Ultrasonic measurement method, no radiation pollution;
♢ Non-contact measurement can extend the service life of the transducer.

4. Product Parameter

Performance
Accuracy	2% (1σ)
Resolution	0.50%
The measuring rage	0% ~ 70%
Temperature compensation	Full measuring range automatic compensation by the built-in Temperature Sensor
Output
Analog output
Signal	4 ~ 20mA，±0.15% error of the readings
Relay output	High and low concentration alarm node,120mA, 350VAC
Ambient condition
Ambient temperature	0 ~ +60℃
Ambient humidity	0~98% Relative humidity (no condensation)
Protection degree
Transmitter	IP65
Sensor	IP68
Medium condition
process pressure	≤0.5MPa
Medium temperature	0~ +60℃
Power source
AC type	220V AC ±15%，50/60Hz，10W
DC type	24V DC ±10%，8W

5. Product Application

♢ Online detection of slurry concentration, coal slime concentration and mortar concentration in metallurgical, coal washing, electric power and other industries;
♢ Tailings backfill concentration measurement in extractive industry;
♢ Sediment movement and sludge observation in rivers and estuaries, and density measurement of floating mud in port channels;
♢ Concentration measurement for water supply plant and sewage disposal plant (reflux sludge, initial sink, the second sink, concentration pool, sludge dehydration, etc.);
♢ Long-term monitoring of pollution sources suspended substance concentration in environmental protection projects.

Contact us if you need more details on Slurry Concentration Device. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Density Meter for Liquids、Density Meter for Solids. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Concentration Meter